Lighting and decorative columns model “branca”

Tender Specification

Special lighting and decorative column, made by a company ISO9001 certified and having authorisation as processing centre according to DM 14/01/08, brand “iPaliarredo” collection, series “Urban” model “BRANCA” registered patent right, height up to the lighting source ~ 4/5/6 meters namely composed of:

➔ Cylindrical central base shaft Ø 102x4x3000 with shaped ends at 45°, made of induction longitudinal welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/1. Welding carried out by welders qualified by I.I.S. (Istituto Italiano della Saldatura) and welding check according to EN ISO 3834. Prepared to be fixed to the basement by planting into the foundation block for a depth of 500 mm, completed of the work at base for the electric wiring according to the standard, cable entry slot with rounded and smoothed edges, earthing connection., opening prepared with inside connections for junction box, and flush type door obtained by plasma cutting.

➔ Junction box type M5 270x68x44, class II double insulated, CEI EN 60668-1, CEI EN 60998-2-1, box IP54, 4 poles 3 ways, rear in/out 4x2.5-16 sqmm, looping 4x1,5-4 sqmm, 1 sectionable fuse holder 8,5x31,5 max 10A on da DIN

➔ Central cylindrical top section Ø 102x4x1000 with shaped lower part at 45°, manufactured employing induction longitudinal welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/1, stepped (reduced) at one end by pressing and joint between them with circumferential welding nearby the steps. Welding are made by MAG automatic process approved by R.I.N.A and I.I.S. (Istituto Italiano della Saldatura) and welding check according to EN ISO 3834. Post top connection according to the lighting fixture to be installed.

➔ Cylindrical vertical rods Ø 60x4x2000 (3000) (4000), arranged on 120°, manufactured employing induction longitudinal welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/1, with caps at the open ends.

➔ Coupling devices composed of ring Ø 180 th.30 for section Ø 102, double supporting bracket 140x100 th.18 for each rod Ø 60 and inox locking bolts composed of grub screws and screws with hexagonal swaged head.

➔ Aluminium base cover, 2 halves to be coupled with purpose made screws.

Tolérances on dimensions UNI EN 40/2 - UNI EN 10219/2.

Protection against corrosion by means of hot dip galvanization obtained with the following cycle: degreasing; pickling, washing, fluxing, pre heating; hot dip galvanization in melted zinc bath at 440÷450°, with minimum percentage of zinc into the bath ≥ 98.5%.

Coating obtained according to UNI EN ISO 1461 with minimum thickness 55 microns et average 70 microns.

External painting, if any, with colour from our colour card, rough effect, obtained with thermosetting powders cycle including: cleaning from zinc coating burs; smoothing of the surfaces by means of a light mechanic device; cleaning of the surfaces in order to eliminate grease or dirty and create a good adherence base; application by means of electrostatic spray of polyester powder suitable for galvanized surfaces for outside installation, in order to reach 60/80 micron thickness; polymerization into oven at constant temperature of approx. 200° for 40-50 minutes, package for each column, by banding with tissue 100% polyester, (no pluriball), in order to avoid damages during the handling phase. The characteristics of the obtained coat will be: average thickness 60-micron, resistance to checkering test ISO2409, resistance to crash test to UNI8901 The columns will be CE marked according to the standard in force (DPR246/93, 89/106/CEE; 93/68/CEE). The label on each column must quote: standard reference EN40-5, manufacturer’s identification, certificate number of the authorization to the mark CE CPD P029, year of marking, product code, and order number reference.

Document owned by Pali Campion srl. Reproduction is permitted only if the source is cited. Technical data are indicative; final specifications will be stated when ordering.