Lighting and decorative columns model “verona”

Tender Specification

P Special lighting and decorative column, made by a company ISO9001 certified and having authorisation as processing centre according to DM 14/01/08, brand “iPaliarredo” collection, series “Street” model “VERONA”, height up to the lighting source ~ 8, 10, 12 meters above ground, namely composed of :

➔ Conical column taper ratio 14 mm/m, obtained by cold bending of steel plate grade S235JR EN 10025 and subsequent external longitudinal welding carried out with automatic process (submerged arc) approved by R.I.N.A. and I.I.S. (Istituto Italiano della Saldatura) and welding check according to EN ISO 3834 The welding seam is smoothed by mechanic action to improve the aesthetic of the column. Shaped and logo welded at around 4.50 meters above ground; welding carried out by welders qualified by I.I.S. (Istituto Italiano della Saldatura) and subsequently smoothed by mechanic action for aesthetic reasons. Drilling for bracket connection by meas of rounded screws. Provided for the anchorage to the basement by direct planting into the foundation block, completed with works at base for the electric wiring according to the standard, cable entry slot with rounded edges, opening with flush door obtained by cutting and internal connections for junction box and earth connection.

➔ Single and double bracket, outreach 2000, curved element d.60, 2 side ribs made of calendered flat iron. Manufactured employing longitudinal induction welded tubes UNI EN 10219/2, steel grade S235JR UNI EN10219/1. Welding are carried out by welders qualified by I.I.S. (Istituto Italiano della Saldatura) and welding check according to EN ISO 3834, subsequently smoothed removing the exceeding external metal for aesthetic reason. Fixing and assembling to the column by throughout screws, closed with caps on the open ends. Lighting fitting connection suitable to the luminaire to be installed.

➔ Base cover Carter made of pressed steel plate, 2 halves to be coupled with purpose made not visible screws with rounded head.

➔ ➔ Junction box 235x70x45, class II double insulated, CEI EN 60668-1, CEI EN 60998-2-1, box IP54, 4 poles 3 ways, rear in/out 4x2.5-16 sqmm, looping 4x1,5-4 sqmm, 1 sectionable fuse holder 8,5x31,5 max 10A on DIN rail

Protection against corrosion by means of hot dip galvanisation obtained with the following cycle: degreasing; pickling, washing, fluxing, pre heating; hot dip galvanization in melted zinc bath at 440÷450°, with minimum percentage of zinc into the bath ≥ 98.5%.

Coating obtained according to UNI EN ISO 1461 with minimum thickness 55 microns et average 70 microns.

External painting, if any, with colour from our colour card; black, anthracite, brown, shadow, granite graphite, green, reseda, steel oversee, powder, aluminium, ruby, chestnut, ivory, white) rough effect, obtained with thermosetting powders cycle including: cleaning from zinc coating burs; smoothing of the surfaces by means of a light mechanic device; cleaning of the surfaces in order to eliminate grease or dirty and create a good adherence base; application by means of electrostatic spray of polyester powder suitable for galvanized surfaces for outside installation, in order to reach 60/80 micron thickness; polymerization into oven at constant temperature of approx. 200° for 40-50 minutes, package for each column, by banding with tissue 100% polyester, (no pluriball), in order to avoid damages during the handling phase. The characteristics of the obtained coat will be: average thickness 60 micron, resistance to checkering test ISO2409, resistance to crash test to UNI8901

The columns will be CE marked according to the standard in force (DPR246/93, 89/106/CEE; 93/68/CEE). The label on each column must quote: standard reference EN40-5, manufacturer’s identification, certificate number of the authorization to the mark CE CPD P029, year of marking, product code, and order number reference.

Document owned by Pali Campion srl. Reproduction is permitted only if the source is cited. Technical data are indicative; final specifications will be stated when ordering.