Fondazioni a vite — ENG
Testo estratto automaticamente dal documento. Impaginazione, tabelle e disegni potrebbero non essere riprodotti correttamente. Per dati tecnici, unità di misura e prescrizioni fa fede il documento originale.
- Revisione del documento
- Non indicata nella fonte
- Stato
- Attualità da confermare con il produttore o l’emittente
Pagine di riferimento
Testo del documento
ATLANTECH LUX
THE REVOLUTION
IN THE FOUNDATIONS
FOR LIGHTING POLES
WWW.ATLANTECH.IT
SOCIAL IMPACT ANALYSIS
ATLANTECH LUX VS CONCRETE PLINTH
Atlantech Lux Concrete Plinth
Lower CO2 emissions due to the
Greater CO2 emissions due to the
Environmental concrete elimination, to the use
concrete production, the use of
impact: CO2 of non invasive installation motor
invasive installation motor means
emissions means and to the final complete
and to the final disposal
recycling
Disposal Removal by simply unscrewing.
Removal by excavator and crane.
of the foundation 100% recyclable galvanized steel.
Disposal costs
at the end of life Recovery at cost of the scrap iron
In one working day it is possible In one working day it is possible
to install 20/30 foundations to install 5/7 foundations.
Installation timing
immediately usable Waiting times in case of on site
and building sites
for the pole installations. plinth construction.
Necessary moving building site Necessary fixed building site
The weight causes displacements
Verticality of the Lasting of verticality over time
over time with consequent
pole over time thanks to a light foundation
pole inclination
Double internal grounding system. The grounding rod is necessary.
Safety of the
The foundation acts like A damage of the external copper
grounding system
a grounding rod cord can cause electrocution
High aesthetic quality thanks Low aesthetic quality due to the
Final aesthetic
to a non invasive foundation view of the concrete plinth
impact
and to a design of urban furniture and the inspection box
ATLANTECH LUX
for lighting poles buried type with integrated inspection box
STANDARD MODELS
• SHORT: box h. 500mm diam. 219mm, screw h.800mm diam. 60mm, for poles
max. base diam. of 95mm and planting depth 500mm
• SMALL: box h. 500mm diam. 323mm, screw h.800mm diam. 60mm, for poles
max. base diam. of 148mm and planting depth 500mm
• SMALL PLUS: box h. 800mm diam. 323mm, screw h.1000mm diam. 76mm, for
poles max. base diam. of 148mm and planting depth 800mm
• MEDIUM: box h. 800mm diam. 406mm, screw h.1000mm diam. 76mm, for
poles max. base diam. of 188mm and planting depth 800mm
• HEAVY: box h. 800mm diam. 508mm, screw h.1000mm diam. 76mm, for poles
max. base diam. of 240mm and planting depth 800mm
ATLANTECH LUX ONE-BOX
for lighting poles buried type without integrated inspection box
STANDARD MODELS
• SHORT 1500: box h. 500mm diam. 219mm, screw h. 1000mm diam. 60mm, for
poles max. base diam. of 102mm and planting depth 500mm
• SHORT 2000: box h. 800mm diam. 219mm, screw h. 1200mm diam. 76mm, for
poles max. base diam. of 188mm and planting depth 800mm
• SMALL 2300: box h. 800mm diam. 323mm, screw h. 1500mm diam. 76mm, for
poles max. base diam. of 240mm and planting depth 800mm
ATLANTECH LUX PLATE
for lighting poles with base plate with wiring connection space
STANDARD MODELS
• 170-200: box h. 500mm diam. 219mm, screw h. 1000mm diam. 60mm, plate
with 4 holes diam. 20mm spacing 170-200mm, for poles max. base diam. of
102mm
• 200-220: box h. 800mm diam. 219mm, screw h. 1200mm diam. 76mm, plate
with 4 holes diam. 22mm spacing 200-220mm, for poles max. base diam. of
188mm
• 270-300: box h. 800mm diam. 323mm, screw h. 1500mm diam. 76mm, plate
with 4 holes diam. 24mm spacing 270-300mm, for poles max. base diam. of
240mm
MATERIALS AND CERTIFICATIONS
• Materials used: S235JR and S355JR steel subjected to a hot galvanizing process
• DoP, Declaration of Performance in compliance with the Construction Product Regulation (UE) N. 305/2011
• Calculation reports performed in the worst conditions (soils with minimum load-bearing capacity, maximum stress
at the base supported by the pole, box uncovered) in compliance with the UNI EN 40-3-1:2013
INSTALLATION EQUIPMENT
• Excavator (starting from 1500 kg for the smaller Atlantech
foundations)
• Hydraulic auger, to be mounted on the excavator, with minimum
torque of 2/2,5 KNw
• Auger bits of the same diameter of the Atlantech box and a widia
auger bit of diameter 100mm for the execution of the hole for the
screw under the Atlantech box in case of hard soils.
Various types of bits are available on the market, depending on
the soil, for vegetal, mixed soils and for cements and rocks
• Installer, to be hooked to the auger, supplied with the Atlantech
foundations
INSTALLATION PHASES ATLANTECH LUX MODEL
1. Execution of the hole of the same diameter and height of the Atlantech box
2. Checking the dimensions of the hole (absolutely no space must remain under the box)
3. Installation of the Atlantech foundation on the hole
4. Mounting the iron manhole cover
5. Lighting pole installation and electrical connections (the corrugated trace can be done both before and after the
installation of the Atlantech foundation)
1 2
3 4 5
THE PAST - THE USE OF CONCRETE
THE FUTURE - THE ATLANTECH LUX TECHNOLOGY
IL FUTURO - LA TECNOLOGIA ATLANTECH LUX
RESEARCH, INNOVATION AND CORPORATE SOCIAL
RESPONSABILITY ARE AT THE BASE OF THE
DEVELOPMENT OF OUR PRODUCTS
Atlantech S.r.l.
Viale del Lavoro, 8
37060 Bonferraro di Sorgà (VR) ITALY
Website: www.atlantech.it
E-mail: info@atlantech.it
Tel.: +39 347 3201905
Rev. Feb. 2020